`Remember me on this computer` option
Select the `Remember me on this computer` option if you wish to be automatically logged on to the computer in future. Your account will remain active for 45 days. Please do not use the `Remember me` option if using a computer with public access or that is used by more than one person.
View more related products to:
Standard CE 22.05.
The completely new ??Chaser-V?? has been redesigned from the ground up in almost every detail. A matter of evolution instead of revolution, to continue the success of the popular and loved Chaser model.
New on the Chaser-V is the new, wide aperture and SAI visor offering a better view on the road, improving both safety and convenience. Comfort is significantly updated by the modified ventilation system. The interior has been improved to better follow the lines of the head, preventing pressure points and offering the necessary tight, yet comfortable fit.
SFL (Super Fibre Laminate) This is the basic Arai outer shell. Super fibre provides more comfort than other shell materials, yet is still strong and lightweight.
One-piece rear vent increases the flow of hot and damp air out of the helmet. Front duct provides fresh and cool air around the top of the head. Closable chin vent controls the airflow to the chin area.
Facial Contour System:
To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds.
Complete removable interiors that may be cleaned with mild soap and lukewarm water rinse well and let it dry for a day, never in direct sunlight or near a stove.
Three-position chin vent:
Three-position chin vent helps in demisting the visor and offering fresh, cool air to the rider.
5mm ??Peel Away??:
5mm thick removable foam layer on the ear cups/ cheek pads and temple pads. Offering more room if desired without the need to purchase an optional headliner or new pads/ear cups.
Wide SAI vision:
Next generation MotoGP tested Super AdSis ?I? visor is extended by 5 mm at both sides and offers the widest peripheral vision in the business for better performance.
Ridges along the upper edge of the shell offer a smooth transition between shield and shell, reducing wind noise.
SuperAdSis LRS(Lever Release System):
Makes visor changes possible in seconds, without tools or removal of the side pods. Cleaning or replacing the shield is easier than ever.
Five times inspected:
Each Arai helmet goes through five separate quality-control departments: after the shell is made, after painting and graphic completion,
after assembly and two in-process inspections.
The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water.
It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours.
All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai.
All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet.
Double-D ring device:
The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen
Smooth shape,better protection:
The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don?t want to decelerate your helmet more than necessary. That?s why all Arai vents and ducts are designed to break off during an impact.
Hard outer shell, soft inner shell:
Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component.
The organic shape of an Arai outer shell offers a more natural appearance,seals better and conforms more to the head?s natural shape for improved comfort, fit and to help minimize wind turbulence.
Different outer shells:
Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for.
Arai In-house test:
This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.
* Helmets are always delivered with a transparent screen.
This helmet has been built, tested and approved according to the European regulations ECE/ONU R22.05, so it can only be used in countries where this European homologation ECE/ONU R22.05 is approved. TRADEINN is not responsible for the use that may be made of this helmet in other countries that are not subject to this European homologation ECE/ONU R22.05, discouraging the use of this in those countries. By means of this notice, the buyer is aware of this fact and, therefore, undertakes not to use the helmet in any territory in which this European homologation ECE/ONU R22.05 is not approved, assuming responsibility for its use, in these countries, renouncing to claim responsibility and / or compensation to TRADEINN in the event of any accident or damage of any kind. In particular, this helmet is not intended for use in the USA or Canada for failing to meet the requirements of these countries.
Are you interested in Arai Chaser V Eco Pure Phil Read? At this moment the product is in stock at motardinn, your online motorcycle store. At motardinn you can find more motorcycle products from the brand Arai. Do not wait any longer and enjoy from Arai Chaser V Eco Pure Phil Read in just a few clicks. Discover motardinn´s wide range of motorcycle supports now.
Write a review or ask our dedicated team of experts a question
EASY & FAST RETURN
SECURE & SAFE