The completely new ‘’Chaser-V’’ has been redesigned from the ground up in almost every detail. A matter of evolution instead of revolution, to continue the success of the popular and loved Chaser model.
New on the Chaser-V is the new, wide aperture and SAI visor offering a better view on the road, improving both safety and convenience. Comfort is significantly updated by the modified ventilation system.
- Outer shell SFL (Super Fibre Laminate):
This is the basic Arai outer shell. Super fibre provides more comfort than other shell materials, yet is still strong and lightweight.
Air Conductor rear vent offers higher vacuum for enhanced ventilation. Three-position chin vent (including demist function), lower side vents and build-in neck exhaust increases the flow of fresh air inside the helmet. Unique visor vents guide fresh air to the forehead area without the need for holes in the outer shell and impact absorbing liner.
- Facial Contour System:
To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds
- Replaceable interior:
Complete removable interiors that may be cleaned with mild soap and lukewarm water rinse well and let it dry for a day, never in direct sunlight or near a stove. Different size thicknesses are available to fit those in-between sizes for a custom fit for every rider.
- Three-position chin vent:
Three-position chin vent helps in demisting the visor and offering fresh, cool air to the rider.
- 5mm ’’Peel Away’:
5mm thick removable foam layer on the ear cups/ cheek pads and temple pads. Offering more room if desired without the need to purchase an optional headliner or new pads/ear cups.
- Wide SAI vision:
Next generation MotoGP tested Super AdSis “I” visor is extended by 5 mm at both sides and offers the widest peripheral vision in the business for better performance. Ridges along the upper edge of the shell offer a smooth transition between shield and shell, reducing wind noise.
- SuperAdSis LRS (Lever Release System):
Makes visor changes possible in seconds, without tools or removal of the side pods. Cleaning or replacing the shield is easier than ever.
- Five times inspected:
Each Arai helmet goes through five separate quality-control departments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections.
- Washable interior:
The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water
It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours.
- All-day comfort:
All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai.
- Penetration tested:
All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet.
- Double-D ring device:
The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener.
- Smooth shape, better protection:
The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact
- Hard outer shell, soft inner shell:
Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component.
- Organic shape:
The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head’s natural
shape for improved comfort, fit and to help minimize wind turbulence
- 5-year limited warranty:
All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture.
- Different outer shells:
Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for.
- Arai In-house test:
This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.
* Helmets are always delivered with a transparent screen.
With Arai Chaser V you can enjoy your activities without complications. If you like the brand Arai and their motorcycle products, visit the categories of the motorcycle products that you are looking for and place your order as soon as possible and receive it in a few days. Our aim at motardinn is to make high-quality products accessible to all with an efficient worldwide delivery service.