Icon Variant Double Stack

Automatic translation Original description available here

Graphics come and go, but colors are timeless. For the person who can’t get down with badass snakes or sweet, sweet skulls, we bring you the Variant Double Stack. Tough enough to roll out with your squad yet respectable enough to show your grandma, the Variant Double Stack has all the bases covered.


Shield:
- Quick-change Fog-Free Variant Precision Optics™ shield.

Liner:
- Hydradry™ moisture wicking liner.

Shell:
- Fiberglass / Dyneema / Carbon fiber shell.

Fit:
- The head is long front-to-back and is narrow side-to-side. This shape offers additional forehead room for those who find that most helmets have pressure points in the forehead.

Venting:
- 6 air intakes and 4 exhaust ports combined with deep channeling in the interior energy absorbing EPS foam keeps your head cool, reducing rider fatigue.

Weight:
- The Variant’s visor and extended chin bar addition adds minimal weight and is offset by the wind tunnel refined shell to produce minimal lift characteristics.


Technologies:

Exterior:
- The wind tunnel-refined shell, executed in a Fiberglass/Dyneema/Carbon matrix, forms a solid first line of defense. The Variant’s signature visor system not only looks aggressive, it contributes to improved vision by helping block out bright sunlight while producing minimal lift characteristics.

Shield:
- The fog free Precision Optics shield, coupled with a reshaped eyeport, increases peripheral vision and and produces an unmatched distortion free line of sight so you can keep your eyes on the prize.

Interior:
- The Variant’s neck roll is incorporated into the removable, sweat wicking Hydradry™ liner for a contoured fit that cradles your noggin and aids in the reduction of wind noise. Coupled with the protective, energy absorbing EPS foam provides critical energy management which reduces the transmitted impact forces.


Care:
- Let’s face it, Icon® helmets look cool and you want to keep them that way. We’ve found the following methods work really well to keep our helmets looking sharp and ready to roll. Remember, never use gas, pre-mix, carb cleaner, brake cleaner or any other random unlabeled spray can lying around the garage. Chemicals and harsh solvents can break down the materials in your helmet; it’s like using brake cleaner to polish your plastics—don’t do it!

Interior Cleaning:
- 1. Remove interior lining as shown on page 10 of the User Manual.
- 2. Soak your interior in a mild solution of baby shampoo.
- 3. Rinse in clean water several times until all soap is gone.
- 4. Let interior air dry and replace accordingly. * Never machine wash or dry your helmet interior.

Shield Cleaning:
- Your helmet is equipped with a scratch resistant fog free shield. Common household cleaners such as glass cleaners, surface cleaners, and furniture cleaners, can leave behind unwanted residues, or in some extreme cases damage the shield itself. It is our recommendation the same steps outlined above for cleaning the exterior of your helmet should be applied to cleaning the exterior of your shield. Use no cleaners or detergents on the inside of your shield. Using anything other than a clean soft cloth, micro fiber cloth, or the bag supplied with your helmet, will ruin or reduce the effectiveness of the fog free coating.

Storage:
- It is a good idea to protect your helmet if it is stored for a period of time. Store your helmet inside the helmet bag we have provided in a secure, dry place out of direct exposure to sunlight.

Exterior Cleaning:
- 1. Lay a warm, wet, cloth towel on the exterior of the helmet for at least 5 minutes to soften dried on bugs. (Don´t skip this step!)
- 2. Using a fresh, wet, clean cloth and mild dish soap wipe down the exterior to get ride of road grime and softened bug guts.
- 3. Use another fresh dry cloth towel to dry the helmet and get rid of any water spots.
- Never machine wash or dry your helmet interior.

Exterior Cleaning:
- 1. Lay a warm, wet, cloth towel on the exterior of the helmet for at least 5 minutes to soften dried on bugs.
- 2. Remove the now softened bugs and road grime with a light blotting action. For this use the soft part of your helmet bag provided or a clean microfiber cloth.
- Never rub aggressively with anything on the Rubatone™ or you can ruin the finish.

ECE 22.05 IMPORTANT NOTE This helmet has been built, tested and approved according to the European regulations ECE/ONU R22.05. TRADEINN is not responsible for the use that may be made of this helmet in other countries that are not subject to this European homologation ECE/ONU R22.05, discouraging the use of this in those countries.

All motorcycle products of the category Integral have a high manufacturer quality and take care of even the smallest details. At motardinn you can find the full catalogue of Helmets products from Icon. The price of Icon Variant Double Stack is 0 $, with the lowest price guarantee, secure payment and an efficient delivery service!

Click on the following link to get more information about:

Specifications

Click on the following link to get more information about:

Manual

Size chart