Scorpion Exo 3000 Air Solid Modular Helmet

Features:

- Airfit Concept: The pump system allows the rider to personalize at any time the adjustment of its helmet thanks to the cheek pads equiped with adjustable air pocket, for a comfort made to measurement.
- Due to its flip-up conception, the EXO-3000 has side air pocket, but also for the first time neck air pocket. The benefits of this technology remain triple: good noise insulation, perfect fitting to every morphology and guarantee of a perfect fit throughout the years. Scorpion Exo models AIR: the made to measurement build to last!
- Pinlock Maxvision: Fitting perfectly into the specially depressed area of the faceshield, the Pinlock creates continuous air pressure through the compression force, which in turn stops condensation and thus fogging from occurring even when the temperature difference between the outside and the inside of the helmet increases.
- Kwikwick3 Liner: Very effective, hypoallergenic, removable, machine washable, and very soft and pleasant to the touch, the KwikWick3 lining of the new ScorpionExo 2015 range is a real custom-made slipper for your head.
- SpeedView: The retractable sunvisor (approved UV400 and anti-fog coating EverClear ) is protecting immediately the eyes by offering higher protection without changing Face Shield.
- System of ventilation: 3 indexed air-intakes adjustable independently (1 at the level of the chin, 1 on the top, 1 on the back), create a depression and optimize the airflow through the helmet.
- Nose guard: improves the performances of the anti-fog coating of the shield.
- Chin strap buckle with micrometric setting for a perfect and reliable adjustment in the time.
- ECE 22.05

Product Care:

Care and Cleaning of Your ScorpionExo Helmet

As with any quality product, proper care will enhance and prolong the usefulness of your helmet and protect your investment. Your helmet is engineered and assembled with state-of-the-art technology including exclusive patents and proprietary trademarked features.

Cleaning the Outside of the Helmet

Never use any solvents or abrasive cleaners to clean your helmet!! For optimum performance, rinse your helmet in warm water using a mild soap. If the outside is dirty with dried dirt and bugs, we suggest you place a wet towel over the helmet for at least one minute before wiping it clean. This softens the foreign objects before removal lessening the chance of scratches. The multiple coatings on the face shield are resistant to light scratching, however, heavy, abusive scratching can break through the coatings and cause visible marks. Removing dirt and bugs with good cleaning practices and keeping your helmet in a RaceCase will significantly help to prolong the life of your helmet and face shields.

Cleaning the Inside of the Helmet

The removable, washable liner in all our helmets make it easy to clean. Even a man can do it. Remove the cheek pads first by unsnapping the 3 (usually) button snaps on each one. Be careful not to ?tear? the pad out, but carefully un-snap each button. The ?crownliner? can be unsnapped (2) from the back of the head area and the pulled away from the helmet in the forehead area. Note the alignment arrows for re-installing the crownliner. Throw these three pieces into the washing machine if possible in a washing bag so that the plastic parts cannot be broken or damage the textile and allow to air dry before re-installing.

Cleaning the Face Shield

The ScorpionExo face shields for 400s and 700s have different cleaning procedures for inside and outside. The outside is coated with an anti-scratch coating which prevents minor scratches, but cannot resist heavy wiping and cleaning without preliminary softening of the dirt, grime and bugs first. Note the damp towel method of softening dried bugs and dirt above. Plastic polishes work fine to clean the outside of the shield as long as the dirt and grime has been softened and removed first. The inner Everclear no-fog coated face shields require special treatment for cleaning. We suggest using a warm water and mild soap combination followed by ?pat drying? with a dry towel. ?Wiping? may cause premature wear and scratching on the Everclear innercoating.

Chemicals

Certain common household chemicals will react negatively with the polycarbonates, fiberglass or coatings of your helmet. Avoid contact with acetone (nail polish remover), caustic solutions (ammonia-based cleaners), hair sprays containing methyene, chlorine from swimming pools or glues.


* Helmets are always delivered with a transparent screen.

IMPORTANT NOTE

This helmet has been built, tested and approved according to the European regulations ECE/ONU R22.05, so it can only be used in countries where this European homologation ECE/ONU R22.05 is approved. TRADEINN is not responsible for the use that may be made of this helmet in other countries that are not subject to this European homologation ECE/ONU R22.05, discouraging the use of this in those countries. By means of this notice, the buyer is aware of this fact and, therefore, undertakes not to use the helmet in any territory in which this European homologation ECE/ONU R22.05 is not approved, assuming responsibility for its use, in these countries, renouncing to claim responsibility and / or compensation to TRADEINN in the event of any accident or damage of any kind. In particular, this helmet is not intended for use in the USA or Canada for failing to meet the requirements of these countries.

Would like to buy Scorpion Exo 3000 Air Solid Modular Helmet? You are at the right place! In the category of Modular at the online motorcycle store you can find a big variety of different models at the best price. Find the best motorcycle products, that adapt to your needs at motardinn. Are you looking for a gift? Don´t miss also our Helmets sales.