Arai Freeway Classic Comet Open Face Helmet

The Freeway-Classic fulfils the fundamental functions of a motorcycle helmet for those who like to take it easy and experience the world around them to the fullest.

Outer Shell Construction SFL.Special Fibre Laminate.

Strict quality controlled construction using special fibre layers, crowded with fibres right to the shell surfaces and bonded with special resins formulated by Arai, to disperse impact energy over the widest possible area - the shell´s main job - through strength, structural integrity and impact flexibility.

Interior:

Replaceable Cheek pads/Ear cups.Cheek pads/ear cups may be easily removed.

All parts (replaceable or not) can be cleaned with lukewarm water and mild soap.

Rinse well after cleaning and never dry in direct sunlight or near a heat source.

Interior parts in different size thickness are available for a custom fit for every rider.

Interior:

Leatherette interior accents.A unique feature is the leatherette interior accent trim, offering a classic appearance.

Made of very supple and soft faux leather offering a luxurious look and feel to the helmet.

Approval:

ECE 22-05.The most common helmet certification internationally, required by over 50 countries worldwide.

Glancing Off:

To minimize impact energy getting into the helmet, it´s crucial that a helmet can slide over a surface.

Arai believes that a Strong, Round & Smooth shell helps to increase a helmets ability to protect the rider during an impact.

Shells with sharp edges or vent ducts that don´t break off can reduce the helmet´s ability to slide, sending energy into the helmet, or even enhance rotational energy.

Glancing Off:

To minimize impact energy getting into the helmet, it´s crucial that a helmet can slide over a surface.

Arai believes that a Strong, Round & Smooth shell helps to increase a helmets ability to protect the rider during an impact.

Shells with sharp edges or vent ducts that don´t break off can reduce the helmet´s ability to slide, sending energy into the helmet, or even enhance rotational energy.

Five times inspected:

Each Arai helmet goes through five separate quality-control depart­ments:

after the shell is made, after painting and graphic completion, after assembly and two in-process inspections.

Washable interior:

The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water.

Handmade:

It can take up to five years for our experts to earn the right to create an Arai shell.

Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours.

All-day comfort:

All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system.

And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai.

Penetration tested:

All Arai helmets are penetration tested, although not required by European helmet standards.

The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet.

Double-D ring device:

The flat and D-shaped rings fit smooth against the chin.

No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener.

Smooth shape, better protection:

The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance.

You don´t want to decelerate your helmet more than necessary.

That´s why all Arai vents and ducts are designed to break off during an impact.

Strong outer shell, soft inner shell:

Arai uses a very strong outer shell to spread impact forces and a soft inner shell to absorb remaining energy.

The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component.

Organic shape:

The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head´s natural shape for improved comfort, fit and to help minimize wind turbulence.

Different outer shells:

Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models.

Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for.

Arai In-house test:

This Arai helmet is designed to meet the stringent Arai In-house criteria, in addition to the mandatory ECE 22-05 standard.

Arai Freeway Classic Comet Open Face Helmet har 100% pengarna tillbaka garanti. Om du på grund av vilken orsak som helst inte är helt nöjd med din Arai Freeway Classic Comet Open Face Helmet som du köpt på motardinn, har du 30 dagar på dig att returnera den från det att du fått varan levererad till dig. Dessutom kan du i vår motorcykelbutik online upptäcka ett brett utbud av märket Arai och komplettera din order med motorcykelprodukter, alltid till bästa pris.