Vennligst skriv inn din epostadresse og vi vil sende deg en link for å tilbakestille passordet ditt via epost umiddelbart.

Solgt og sendt av

salg

Gratis frakt

Retur av bestillinger

Gå tilbake til forrige side | Hjemmeside
AGV

Bærekraftig

AGV Peak for Helmet AX-8 Dual Evo AX-8 Dual

$ 0

Før:

Du sparer: %

Gratis frakt

Gratis montering

Ingen toll skal betales.

Solgt og sendt av

Se andre selgere()

Farge:

Denne størrelsen er utsolgt

Ikke mist håpet. Skriv inn e-postadressen din, så får du en e-post hvis denne varen kommer på lager igjen.

Beklager, ingen flere enheter av dette produktet tilgjengelige

Du sparer:

Legg til pack min 
KJØP NÅ MED 1 KLIKK

Andre tilgjengelige farger

left
right

Kan matches med

Reportar error

Se flere relaterte produkter til:

Produktbeskrivelse AGV Peak for Helmet AX-8 Dual Evo AX-8 Dual

THE AX-8 DUAL EVO IS AN EXTREMELY VERSATILE HELMET THAT IS IDEALLY SUITED FOR BOTH ON AND OFF-ROAD USE.

Its design resembles the AX-8 EVO motocross version on which it was modelled.

Thanks however to additional technical features such as the visor and its special opening mechanism, the open/shut chin air vent and extra ventilation on the top, this helmet provides the same superb performance and comfort as.

a road helmet.

As a demonstration of its versatility, AX-8 Dual Evo can be configured as follows:

1.

SUPERMOTARD/TRAIL version with visor and peak.

2.

MOTOCROSS/ENDURO version without visor but for use with Motocross goggles.

3.

STREETFIGHTER/NAKED version with visor and no peak.

The possibility of interchanging the chin air intake of AX-8 Evo with that of AX-8 Dual Evo further increases the customisation possibilities of the helmet.

Features:

SHELL:

- The shell is made from three SSL (Super Super Light) layers of carbon fibre, Aramidic and fibreglass to reduce the weight of the helmet and ensure a very high degree of safety.

The AX-8 Dual Evo is available in XXS to XXXL sizes with three differing outer shell sizes.

VENTILATION:

- The IVS (Integrated Ventilation System) features ducts hollowed intothe shell to provide excellent air circulation inside the helmet and for better aerodynamic performance.

The air vents on the front, top and chin guard ensure a constant flow of cool air inside the helmet.

The rear extractors use ducts in the EPS to remove hot, moist air from inside the helmet.

VISOR:

- The DUAL scratch resistant, anti-fog polycarbonate visor fits flush with the lower part of the shell and has a reinforced edge.

The opening mechanism can be customised to meet the wearer´s requirements.

INNER LINERS:

- The sanitised, breathable Dri-Lex® liners can be removed and washed,as can the retention strap cover thus ensuring perfect hygiene at.

all times.

The liners are also better padded for improved comfort.

Soft flexible covers have replaced fabric in the visor area and these.

new covers are easily washed with a sponge or brush.

The breath deflector and chin guard can be removed.

FUNCTIONALITY / SAFETY:

- The new shape of the helmet around the chin and the wider, softer edge cut down any interference and reduce the risk of impact trauma.

thanks to the “shock-absorber” function.

The chin air vent can be easily removed without tools and is interchangeable with the AX-8.

Evo vent.

It features an open/closed position mechanism that governs air flow inside the helmet.

The peak on the AX-8 Dual Evo has.

been specially designed to reduce the “sail effect” at high speed while aluminium screws provide increased strength.

The retention.

system is Double D with double ring.

The helmet weighs just 1300 g (+/- 50 g)*.

Technology:

- Exterior shell in 3 sizes made entirely of SSL layers (Fibreglass, aramid and Carbon Fibre).

- Homologation:

ECE 2205, ECE DOT, NBR, AS/NZS.

- Weight E2205:

1300 g (+/- 50 g).

- Chin guard base acts as shock-absorber.

- IVS (Integrated Ventilation System) with large ducts hollowed into the shell for improved air circulation inside the helmet and better.

aerodynamic efficiency.

- 3 front vents, 1 top vent and 2 rear extractors.

- Chin air vent with open/close position which can be easily removed and replaced without the use of tools and is interchangeable.

with that on the AX-8/AX-8 Evo.

- New DUAL visor in scratch-resistant, anti-fog polycarbonate.

- Visor mechanism with customisable opening system.

- Specially designed peak which minimises any “sail effect”.

- Fully removable and washable liners (including the flap on the strap).

- Dri-Lex® sanitised fabrics.

The fixed part of the cheek pads is covered with a soft, easily washed, flexible material.

- Double D retention system.




Er du ute etter AGV Peak for Helmet AX-8 Dual Evo AX-8 Dual? Hos motardinn finner du alle typer Visirer produkter fra de beste merkene. For eksempel fra AGV, et ledende merke i bransjen og garanterer deg den beste produksjonskvalitet. Ikke vent lenger og utstyr deg med produkter fra vår motorsykkel butikk.

Spesifikasjoner AGV Peak for Helmet AX-8 Dual Evo AX-8 Dual

Teknologi AGV Peak for Helmet AX-8 Dual Evo AX-8 Dual

Bærekraftig AGV Peak for Helmet AX-8 Dual Evo AX-8 Dual

Mer informasjon |

Ekspertgjennomgang. AGV Peak for Helmet AX-8 Dual Evo AX-8 Dual

Dette produktet er også solgt av

Pris + frakt

Leveringsdato

Selgerinformasjon

Størrelse

Bestselgere

Fullfør handlekurven din

Сопутствующие товары

Skriv en anmeldelse og tjen CoINNs

/ 5

1 Anmeldelser

5 stjerner

%

4 stjerner

%

3 stjerner

%

2 stjerner

%

1 stjerner

%

Skriv en anmeldelse om dette produktet

Svar på spørsmålet

Skriv svaret ditt

Spørsmålet er allerede besvart, tusen takk for at du prøver å hjelpe en annen kunde. Vi vil stole på deg for fremtidige spørsmål.

Still et teknisk spørsmål om dette produktet

30-day easy & fast return

Secure & safe shopping

Satisfaction 100% guaranteed

Lowest prices guaranteed