Hi Q Tools PM1100 6/12V 1.1A For Lead-Acid+Lithium Batteries

CANBUS-enabled battery charger for 6- and 12-volt lead-acid batteries (WET, MF, AGM and Gel)ANDlithium LiFePo4 batteries.
You can use this charger to recharge the battery when needed or leave it on for extended periods of time (for example, over winter), thus extending battery life.
Particularly suitable for small and medium-size batteries in vintage cars, passengers cars, jet skis, lawnmowers, snowmobiles, etc.

- with a charger so you can charge almost every starter battery on the market
- future-proof: even if you have a motorcycle with a (standard?) lithium battery, you can continue to use the charger
- after switching on the mode button, it automatically detects whether a lithium, 6- or a 12-volt battery is connected
- for a 12-volt AGM battery, a special charge cycle can still be selected
- it checks the charging status of the battery and automatically starts the optimal charging process or the freshness-keeping mode
- built-in battery desulfator to restore used batteries. It can also reactivate undamaged, discharged 2-volt batteries
- on most models with CANBUS, also suitable for connection to the original on-board plug socket (for example, for BMW, Ducati, Triumph and Harley-Davidson) – you may need a suitable adapter (see options)
- from plugging it in and forgetting to use the vehicle – the charger does all there is in between
- includes removable crocodile clips which are attached to eyelets that can also be screwed directly to the battery terminals alternatively
- this is particularly functional if the battery is difficult to reach for
- the connection to the charger is made through an X-Connect plug – this also allows for the connection of further accessories (see options)
- if the X-Connect socket is screwed firmly to the battery, it can be closed with a rubber cover
- the housing can be connected via two holding eyelets, e.g., fixed to the wall (inside diameter 4 mm)
- extra long cables to operate independently of the socket position
- input voltage 100 V-240 V AC, 50-60 Hz, maximum consumption 30 watts
- charging current up to 1100 mA – suitable for batteries up to 40 Ah, fresh-hold function for batteries up to 120 Ah
- degree of protection: IP65

Specifications:

Dimensions:
- Length x width x height housing: 153 x 64 x 40 mm
- Wide crocodile clips metal/plastic: 12/15 mm
- Cable length device to outlet: 204 cm
- Cable length device to X-Connect plug: 140 cm
- Cable length Connect plug to battery connection grommets: 56 cm
- Cable length Connect plug to tip crocodile clips: 64 cm
- eyelet: 6.5 mm (M6)-
- Weight: 530 g

Do not wait any longer and buy Hi q tools PM1100 6/12V 1.1A For Lead-Acid+Lithium Batteries. For any other information about the characteristics of Hi q tools PM1100 6/12V 1.1A For Lead-Acid+Lithium Batteries, you can get in contact with motardinn through our contact page. motardinn offers an exclusive collection of Electronics for motorcycle and other leisure activity. Our Electronics will ensure you enjoy your sport and daily activity and make your life more comfortable with our unique range of Chargers articles.