Icon Alliance Overlord Full Face Helmet

Come correct or don’t come at all. Everyone knows looking flash is the first step to more horsepower. The Alliance Overlord has all the street style swagger you’ve come to expect from ICON. Team the Alliance up with the Overlord SB2 jacket and dial your riding kit to eleven.

Fit:
- The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back and a little wider side-to-side.

Venting:
- 5 air intakes and 5 exhaust ports combined with strategically placed channeling in the interior energy absorbing EPS foam forces air into the helmet at low and high speeds.


Features:

World Standard:
- Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.

Shield:
- Includes Clear quick-change Fog-Free Proshield™ with Prolock™ shield locking system.

Liner:
- Sublimated Hydradry™ moisture wicking liner.

Shell:
- Injection molded polycarbonate shell for strength and durability.


Specifications:

Weight:
- A reduced shell profile helps reduce overall weight, while maintaining the the exclusive World Standard of ICON to suit your riding style.


Technology:

Exterior:
- The helmet’s ventilation system consists of strategically placed air vents, intakes, air channels and exhaust ports. The main ingredient is the Supervent system featuring oversized intake ports controlled by individual vent triggers along with recessed supervenes to reduce wind noise.

Shield:
- The quick-change fog-free Proshield™ keeps the bugs in check while the ProLock™ shield locking system creates a tight seal from the elements.

Interior:
- The removable sweat wicking Hydradry liner provides a snug and contoured fit. Air from the vents is channeled between the comfort liner and the protective,energy absorbing EPS foam liner to create a nearly perfect rider-focused interior. The airflow works in conjunction with the Hydradry liner to effectively reduce heat build up.


Care:

- Let’s face it, Icon® helmets look cool and you want to keep them that way. We’ve found the following methods work really well to keep our helmets looking sharp and ready to roll. Remember, never use gas, pre-mix, carb cleaner, brake cleaner or any other random unlabeled spray can lying around the garage. Chemicals and harsh solvents can break down the materials in your helmet; it’s like using brake cleaner to polish your plastics—don’t do it!

Interior Cleaning:
- 1. Remove interior lining as shown on page 10 of the User Manual. 2. Soak your interior in a mild solution of baby shampoo. 3. Rinse in clean water several times until all soap is gone. 4. Let interior air dry and replace accordingly. * Never machine wash or dry your helmet interior.

Shield Cleaning:
- Your helmet is equipped with a scratch resistant fog free shield. Common household cleaners such as glass cleaners, surface cleaners, and furniture cleaners, can leave behind unwanted residues, or in some extreme cases damage the shield itself. It is our recommendation the same steps outlined above for cleaning the exterior of your helmet should be applied to cleaning the exterior of your shield. Use no cleaners or detergents on the inside of your shield. Using anything other than a clean soft cloth, micro fiber cloth, or the bag supplied with your helmet, will ruin or reduce the effectiveness of the fog free coating.

Storage:
- It is a good idea to protect your helmet if it is stored for a period of time. Store your helmet inside the helmet bag we have provided in a secure, dry place out of direct exposure to sunlight.

Exterior Cleaning (Gloss Helmets):
- 1. Lay a warm, wet, cloth towel on the exterior of the helmet for at least 5 minutes to soften dried on bugs. (Don´t skip this step!) 2. Using a fresh, wet, clean cloth and mild dish soap wipe down the exterior to get ride of road grime and softened bug guts. 3. Use another fresh dry cloth towel to dry the helmet and get rid of any water spots. * Never machine wash or dry your helmet interior.

Exterior Cleaning (Rubatone Helmets):
- 1. Lay a warm, wet, cloth towel on the exterior of the helmet for at least 5 minutes to soften dried on bugs. 2.Remove the now softened bugs and road grime with a light blotting action. For this use the soft part of your helmet bag provided or a clean microfiber cloth. * Never rub aggressively with anything on the Rubatone™ or you can ruin the finish.

Maintenance:
1. For gloss helmet finishes, use spray automotive wax that is specifically designed for cars with a clear coat. (Available at any automotive store.) 2. For matte finishes, you know better than to polish a matte finish don’t you?

If you are interested in Icon Alliance Overlord Full Face Helmet, discover also other motorcycle products related to Icon in the Helmets department and Full face catalogue. In addition, when buying at motardinn, your online motorcycle store, you join the biggest sports community, where you can find opinions, product reviews, and the best offers that you are interested in.