Scorpion Exo 2000 EVO Air Bautista

Features:

- 2 dimensional faceshield equipped with Tear-off pins and Maxvision ready.

- Emergency cheekpads release in order to make easier the removing of the helmet in case of crash.

- Shield lock system:

a 3 position lever allows to lock the shield in closed or slightly opened position.

- Ventilation system:

Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet.

- Breath-deflector:

Enhanced fog-free performance.

- Chin-cover:

contributes to noise reduction.

- Closing chinstrap by titanium double D ring.

- AIRFIT CONCEPT:

AirFit permits a rider to personalize helmet fit through air adjustable cheek pads with additional noise reduction.Only by SCORPION EXO!

- Pinlock® MAXVISION:

Fitting perfectly into the specially depressed area of the faceshield, the Pinlock® creates continuous air pressure through the compression force, which in turn stops condensation and thus fogging from occurring even when the temperature difference between the outside and the inside of the helmet increases.

- KWIKWICK3® LINER:

Very effective, hypoallergenic, removable, machine washable, and very soft and pleasant to the touch.

- TCT® Thermodynamical Composite Technology:

Extremely light, the new TCT® structure provides a level of protection as yet unseen in the world of helmets.

This smart shell is able to gradually crumple on impact, which allows it to absorb most of the energy generated by the shock, while retaining one of the strongest structures.

- NEW ELLIP-TEC® FACESHIELD SYSTEM:

Launched on the new Scorpion Racing Exo-2000 Air, the ELLIP-TEC® faceshield mechanism further improves the ease and speed of faceshield changes so unique to Scorpion.

This operation can be done tool-less within 10 seconds, with the shield open.

Wind tunnel designed to minimize wind noise at high speed, fitted with even more powerful springs to ensure optimum fit of the shield against the seal through the compression force, fully sealed and quieter, ELLIP TEC is also stronger to keep the shield in place in the event of a fall.

Care:

- Care and Cleaning of Your ScorpionExo Helmet:

As with any quality product, proper care will enhance and prolong the usefulness of your helmet and protect your investment.

Your helmet is engineered and assembled with state-of-the-art technology including exclusive patents and proprietary trademarked features.

- Cleaning the Outside of the Helmet:

Never use any solvents or abrasive cleaners to clean your helmet!! For optimum performance, rinse your helmet in warm water using a mild soap.

If the outside is dirty with dried dirt and bugs, we suggest you place a wet towel over the helmet for at least one minute before wiping it clean.

This softens the foreign objects before removal lessening the chance of scratches.

The multiple coatings on the face shield are resistant to light scratching, however, heavy, abusive scratching can break through the coatings and cause visible marks.

Removing dirt and bugs with good cleaning practices and keeping your helmet in a RaceCase will significantly help to prolong the life of your helmet and face shields.

- Cleaning the Inside of the Helmet:

The removable, washable liner in all our helmets make it easy to clean.

Even a man can do it.

Remove the cheek pads first by unsnapping the 3 (usually) button snaps on each one.

Be careful not to tear the pad out, but carefully un-snap each button.

The crownliner can be unsnapped (2) from the back of the head area and the pulled away from the helmet in the forehead area.

Note the alignment arrows for re-installing the crownliner.

Throw these three pieces into the washing machine if possible in a washing bag so that the plastic parts cannot be broken or damage the textile and allow to air dry before re-installing.

- Cleaning the Face Shield:

The ScorpionExo face shields for 400s and 700s have different cleaning procedures for inside and outside.

The outside is coated with an anti-scratch coating which prevents minor scratches, but cannot resist heavy wiping and cleaning without preliminary softening of the dirt, grime and bugs first.

Note the damp towel method of softening dried bugs and dirt above.

Plastic polishes work fine to clean the outside of the shield as long as the dirt and grime has been softened and removed first.

The inner Everclear no-fog coated face shields require special treatment for cleaning.

We suggest using a warm water and mild soap combination followed by pat drying with a dry towel.

Wiping may cause premature wear and scratching on the Everclear innercoating.

- Chemicals:

Certain common household chemicals will react negatively with the polycarbonates, fiberglass or coatings of your helmet.

Avoid contact with acetone (nail polish remover), caustic solutions (ammonia-based cleaners), hair sprays containing methyene, chlorine from swimming pools or glues.

motardinn 직원 일동은 고객님들이 더욱 편안하게 스포츠 활동을 즐기실 수 있도록 최고의 품질을 지닌 모터사이클 제품을 만들기 위해 노력하고 있습니다. Scorpion Exo 2000 EVO Air Bautista 제품을 구입할 생각이 있으신가요? 우리 motardinn에서 제공하는 헬멧 카탈로그의 통합 로드 카테고리에서 여러분이 찾고 계시는 모터사이클 관련 상품을 쉽게 찾아보실 수 있습니다! 지금 주문하시고 빠르게 받아보세요.